Right Crankcase Cover Removal - Sym Jet 4 125 Manual

10. A.C. GENERATOR/STARTING CLUTCH
Remove the flywheel with the flywheel puller.
Special service tools:
Flywheel puller
Shaft protector
Caution
Install a shaft protector on the right end of
crankshaft to avoid damaging the crankshaft
before installing the flywheel puller.
Remove the connectors of the A.C.
generator and pulse generator.
Remove the 6 bolts for the pulse generator,
the A.C. generator coil and cable guide.
Then, remove the A.C. generator assembly.
Caution
Do not damage the alternator coil.
RIGHT CRANKCASE COVER
REMOVAL
Remove the right crankcase cover. (6 bolts)
Remove setting pin and gasket.
Remove the gasket or foreign materials on
the connection surfaces of both the cover
and crankcase.
Caution
Do not damage the connection surfaces.
10-4
Flywheel puller
Pulse generator
connector
Generator connector
Pulse generator
Coil
SYM
Cable guide
6 bolts