Sym MAXSYM 400i Service Manual page 173

To this chapter contents
12. Cooling System
4:
Check the air exhausted through the thermostat
tube head until coolant come out.
Thermostat tube head
Thermostat cover joint end
5:
Check the air exhausted through the thermostat
cover joint until coolant come out.
Reconnect thermostat tube
6:
Reconnect thermostat tube(19320) to thermostat
cover joint(19315)
7:
Loosen flange bolt ( 8X12) on the water pump
cover(19221) for exhausting air until coolant
come out.
Tighten the flange bolt when finish.
Air evacuating bolt
12-10