Loading Material; Loading Label Rolls - CAB MACH4 Operator's Manual

4

Loading Material

4.1

Loading Label Rolls

4.1.1 Adapting the Roll Hub
Label rolls are supplied with different diameters. The roll hub can hold label rolls with a core diameter of 38 - 75 mm,
or 76 mm with the detachable adapters fitted.
Fig. 3 Roll hub with and without adapter
Dismounting the adapter
 Open the cover and remove the roll hub (10 - fig. 1) from the printer.
 Remove the edge stop (3),  4.1.2 on page 12, press the adapter (2) in at the three pressure points (1), as shown
in the figure, and remove it.
Mounting the adapter
Push the adapter (2) on until it slots into place.
1 2 3
11