Convenient functions
Setting the tool conditions
Setting the Tool Condition
The tool setting allows 8 settings numbered from 1 to 8 to be memorized.
First select this condition No. to set the tool conditions. Switching the
condition No. allows plotting to run immediately according to the preset
8 types of tool conditions.
Setting the Force
This function allows cutting and plotting force to be set.
Set it with reference to the tool conditions for each media
and tool type.
Setting the Speed
This function allows the tool speed (moving speed) for
plotting to be set.
Setting the Acceleration
P.2-30
Setting the Offset
P.2-26
Area option
Enlarging/Shrinking
Enlarging/shrinking for plotting can be set.
P.2-24
P.2-29
P.2-28
This function allows the acceleration for plotting to be set.
Corrects the offset of center point for betaken blade edge and plunger depending
on the cutter blade types to be used. The standard values are already set when the
blade name is selected. Besides, sensitive adjustment can be made within ± 5 range
against the standard value.
P.4-8