GRAPHTEC FC8600 SERIES Setup Manual page 3

Tool carriage
The Cutter plunger is mounted on the Tool carriage
during use. The Cutter blade is mounted on the Cutter
plunger.
Plotting pen (Water-based fi ber pen)
Using the plotting pen instead of a cutter
allows the drawing and illustration to be
generated.
Use it for testing before cutting.
Media
The media includes the fi lm, paper and etc. Select it depending on the application.
Marking fi lm
[STRUCTURE OF MARKING FILM]
Paper (Roll media)
*To avoid bodily injury, handle cutter blades with care.
Blade length adjustment knob
Adjust the blade
length by turning
the Blade length
adjustment knob.
Cutter plunger
Backing sheet
Marking
fi lm
Paste
Backing sheet
Drawing and illustration
using the PEN
Paper
Adjust the blade length to such a
degree that the trace of blade can
be made on the backing sheet.
Sticker
using the Cutter
Pattern paper
cutting out the cut line