Selecting The Display Functions - MV Agusta Brutale R Owner's Manual

4.4.1. Selecting the display functions

The following settings may be changed
on the display:
• "RUN" (Odometer)
• "CHRONO" (Chronometer)
• "SERVICE" (Expiration of scheduled
maintenance service)
• "TC" (Traction control)
• "IMMOBILIZER" (Antitheft device)
To display the operating modes, press
"SET" for less than four seconds. When
pressed, the display shows all modes,
in a sequence. Select the desired
mode.
OPERATION
WARNING
The operation must be performed while the engine is not
running, the gears are in neutral, the motorcycle is sta-
tionary, and with the feet on the ground. Do not set the
display functions while riding as it may cause loss of
control, resulting in an accident, personal injury or death.
- 71 -
4
4