Searching Titles - JVC CA-UXQ1S Instruction Manual

Searching Titles

This function allows you to search titles for tracks
or groups in an MD.
1
Press , and then press
2
Press repeatedly to select
the sarch type.
3
Press .
Example: While track titles are being searched
While group titles are being searched,
"GROUP SEARCH" is displayed.
4
Enter the title you want to find.
• Enter the first one to five characters of the
title.
Example: Entering "F" searches titles start-
ing with "F" in order of track num-
ber.
Entering "Frien" searches titles
starting with "Frien" in order of
track number.
• For entering titles, refer to "Entering Titles"
( page 30).
• When searching tracks or groups with no
titles, enter nothing, and then proceed to
step 5.
5
Press .
• "SEARCH" appears and the title search
starts. When the title is found, playback of
the track starts. When playback finishes, the
next title search automatically starts.
NOTE
• A space is treated as a character. However, when
no character exists after the space, the space is
ignored.
• The title search function is case-sensitive.
• When no corresponding titles are found,
"SEARCH END" appears.
.
For searching track titles.
For searching group titles.
(This function is available
only when there are
groups.)
Searching another track or group title
Press (or
Quitting the title search
Press .
• The title search is cancelled and playback
returns to the beginning of the current track.
Introduction
).
20