Basic Operations; Setting The Clock - JVC CA-UXQ1S Instruction Manual

Basic Operations

Basic Operations
About this manual
• This manual explains the operations
assuming that you will use the remote con-
trol. Some buttons on the main unit are the
same as those on the remote control. You
can use either button in this case.
• Some diagrams in this manual are simpli-
fied or exaggerated for the purpose of
explanation.
• You can operate some functions differently
from the explanation given in this manual.

Setting the Clock

You can set the clock while the main unit is turned
either on or off.
Example: To set the clock to 10:10 a.m.
1
Press .
2
Set the hour.
Back Next
• Holding down the button causes the hour to
increment.
Number buttons
• You can use the number buttons to specify
the hour.
Refer to "Using the number buttons" shown
below.
3
Press .
• To return to step 2, press
4
Set the minute in the same manner
as steps 2 and 3.
Adjusting the clock
Press four times to display the clock, and then
adjust the clock starting from step 2.
Displaying the clock while using the
main unit
Press repeatedly.
NOTE
• The time display on the main unit is a 24-hour
clock.
• The clock will gain or lose approximately 1
minute per month.
• Set the clock again after you have disconnected
the power plug or a power cut has occurred.
Using the number buttons
Examples: 3:
13:
20:
23:
.
10