JVC CA-UXQ1S Instruction Manual page 28

(Continued)
Recording Sound to MDs
Things You Should Know
about MD Recording
• It may be unlawful to record or playback
copyright material without the consent of the
copyright owner.
• You can record tracks having different MDLP
modes onto a single MD.
• You cannot use the monaural extended record-
ing function with this product.
CAUTION
• You cannot play back tracks recorded in LP2 or
LP4 with audio equipment that is not compatible
with MDLP. When you attempt playback, "LP: "
appears in front of the track title, and the main unit
does not produce any sound. When you play back
tracks recorded in LP2 or LP4 with audio equip-
ment that is compatible with MDLP, "LP: " does not
appear.
To activate or cancel the "LP: " indicator, press
. ( page 25)
• You can record up to 254 tracks to an MD. If you
try to record 255 or more tracks, "DISC FULL"
appears.
• When you use a partially-recorded MD, this
product searches for the blank portion and
records the new tracks to that portion.
Unlike cassette tape recording, you cannot
record over old tracks on an MD.
• Changing in sound volume and quality on this
product during recording does not affect the
recorded sound.
• Sound from an audio CD is recorded as digital
signals to an MD. Sound from the radio or AUX
is converted from analog signals to digital sig-
nals during recording.
CAUTION
• Do not bump or sway the main unit during MD
recording/editing. Be especially careful while
"WRITING" is displayed. Such movement may
interfere with MD playback.
CD-R/CD-RW recording
• When you record sound from a CD-R or CD-
RW (digital audio) onto an MD, pressing
displays "SCMS CANNOT COPY" in the
display window, and analog normal speed
recording automatically starts.
• You can manually select analog recording by
holding down for 4 or more seconds and
pressing once again while "ANALOG
REC?" is displayed.
25
"LP: " indicator setting
Press .
• Each time you press
toggles as follows.
:For adding "LP: " to the track title.
:For deleting "LP: " from the track title.
Recording Sound from Radio,
Cassette Tape or Other
Equipment
NOTE
• The recorded sound level is automatically adjusted.
• Sound-synchronized recording is employed for
recording sound from other equipment (AUX).
With sound-synchronized recording, this product
automatically identifies sound signals from the
sound source and starts recording. When sound
from the sound source pauses for 30 or more
seconds, this product automatically quits
recording. The blank time between the last
recorded track and the next recorded track is
approximately 2 seconds.
1
Select a sound source
Sound source
Radio broad- Select the radio station whose broad-
cast
cast you want to record (
14).
Cassette tape Insert a cassette tape for playback,
playback
press
Press
mode when necessary.
Sound from
Press
other equip-
and prepare playback on the other
ment (AUX)
equipment (
2
Insert an MD for recording.
• Confirm the MDLP, "LP: " indicator and
group recording settings. (
and on the left)
• Close the write protect knob on the MD
( page 45).
3
Hold down
for approximately 4 seconds to
display the track mark options.
, the display
.
Operation
page
, and then press .
to select the reverse
repeatedly to select AUX,
page 22).
pages 23
on the main unit