Md/Cd Messages - JVC CA-UXQ1S Instruction Manual

MD/CD Messages

MD message
CANNOT ENTRY! You are trying to add a track that already
belongs to the group.
CANNOT FORM! You are trying to form a new group with a
sequence of tracks included in other groups.
CANNOT GROUP! There is no more space for group information.
(Group information is stored in the same area
as title information.)
CANNOT JOIN You are trying to join tracks that have different
MDLP modes (SP/LP2/LP4), or tracks of only 8
or less seconds which are recorded in SP mode
(the standard stereo recording mode)).
CANNOT LISTEN You are trying to adjust the volume during high
speed recording.
CANNOT TITLE You are trying to enter a total of 1,793 or more
characters to the MD.
READ ERROR The MD information cannot be read.
DISC FULL There is no more space in the MD. You are try-
ing to record 255 or more tracks.
DISC PROTECTED You are trying to edit or record a track in an MD
whose write protect knob is open.
EMERGENCY A malfunction occurred during recording.
STOP
GROUP FULL You are trying to form 100 or more groups.
GROUP TRACK You are trying to form a group with a track
already belonging to another group.
LOAD ERROR The MD is not properly loaded.
MD NO DISC No MD is loaded.
PLAYBACK DISC You are trying to record to an MD which is
designed only for playback.
SCMS CANNOT You are trying to make a digital audio duplica-
COPY tion of a CD-R or CD-RW.
TRACK You are trying to divide, join, or erase tracks
PROTECTED which are recorded in the Net MD format.
The tracks are write-protected on equipment
other than this product.
HCMS CANNOT You are trying to record a track with the high
COPY speed recording function within 74 minutes of
starting to record that same track with the high
speed recording function.
BLANK DISC There are no tracks in the MD.
CD message
CANNOT PLAY You are trying to play back an unplayable CD or
a CD that has many scratches.
CD NO DISC No CD is loaded.
Meaning
Meaning
Possible solution
Select groupable tracks. (
Select groupable tracks. (
You cannot add more group information. (Find
and erase unnecessary titles from the MD or
tracks.)
The MD system restricts such operation.
You cannot listen to sound from a CD during
high speed recording.
You cannot enter more titles.
Momentarily turn off the main unit. If the same
message appears again, the MD may be mal-
functioning. Replace the MD.
Replace the MD with a recordable MD.
( page 44)
Close the write protect knob on the MD.
( page 45).
Press (Stop) to quit recording, press
(Eject) to eject the MD, and then start recording
again.
You can form up to 99 groups.
Select groupable tracks. (
Insert the MD properly.
Insert an MD.
Replace the MD with a recordable MD.
Normal speed analog recording is automatically
used. ( page 25)
Edit the tracks on equipment compatible with
Net MD.
Edit the tracks on the equipment on which the
tracks were recorded.
An internal timer is functioning for copyright
protection. Wait 74 minutes, or change from
high speed recording to normal speed record-
ing.
–
Possible solution
Replace the CD.
Place a CD on the CD tray.
Introduction
page 35)
page 34)
page 34)
46