Table of Contents
Advertisement
Basic operations
Turning on/off the System
Remote control
You can also turn on the System by pressing source
0
buttons (except "AirPlay").
Setting the clock
1
Display the clock setting screen.
Remote control
If you have already set the clock before, press
0
[CLOCK/TIMER] repeatedly until "Clock
Setting" is displayed.
2
Adjust the hour.
Remote control
/
(Press repeatedly)
3
Repeat 2 to adjust the minute.
To correct a misentry during the process, press
[CANCEL]. You can return to the previous step.
NOTE
The clock may gain or lose 1 to 2 minutes per month.
0
You may need to readjust the clock periodically.
About several hours after you disconnect the AC
0
power cord and no batteries are installed, the set
time will be reset.
To display the clock while being turned off
Main unit
The clock is displayed for a few seconds.
0
Getting started
1
2
Remote control
Select a source.
Remote control
/
/
/
Main unit
Adjust the volume.
Remote control
(Press repeatedly)
Adjustable range: Min, 1 — 29, Max
0
Main unit
/
/
Main unit
(Turn)
13
Advertisement
Table of Contents
