Engine Air Cleaner Service Indicator - Inspect; Engine Air Precleaner - Check/Clean; Engine Oil Level - Check; Every 2000 Service Hours Engine Mounts - Inspect - Perkins XGA 1600 Series Operation And Maintenance Manual

1600 series industrial engine
Table of Contents

Advertisement

74
Maintenance Section

Engine Air Cleaner Service Indicator - Inspect

Engine Air Cleaner Service
Indicator - Inspect
(If Equipped)
Some engines may be equipped with a different
service indicator.
Some engines are equipped with a differential gauge
for inlet air pressure. The differential gauge for inlet
air pressure displays the difference in the pressure
that is measured before the air cleaner element and
the pressure that is measured after the air cleaner
element. As the air cleaner element becomes dirty,
the pressure differential rises. If your engine is
equipped with a different type of service indicator,
follow the OEM recommendations in order to service
the air cleaner service indicator.
The service indicator may be mounted on the air
cleaner housing or in a remote location.
Illustration 46
Typical service indicator
Observe the service indicator. The air cleaner
element should be cleaned or the air cleaner element
should be replaced when the following condition
occurs:
The red piston locks in the visible position.
Engine Air Precleaner -
Check/Clean
If equipped, the precleaner should be check daily
and cleaned as required.
i02568159
Engine Mounts - Inspect
Note: The engine mounts may not have been
supplied by Perkins. Refer to the OEM information
for further information on the engine mounts and the
correct bolt torque.
Inspect the engine mounts for deterioration and for
correct bolt torque. Engine vibration can be caused
by the following conditions:
Incorrect mounting of the engine
Deterioration of the engine mounts
Loose engine mounts
Any engine mount that shows deterioration should
be replaced. Refer to the OEM information for the
recommended torques.

Engine Oil Level - Check

Hot oil and hot components can cause personal
injury. Do not allow hot oil or hot components to
contact the skin.
g00103777
i04654709
Illustration 47
Typical example
Perform this maintenance with the engine stopped.
Note: Ensure that the engine is either level or that
the engine is in the normal operating position in order
to obtain a true level indication.
SEBU8455
i02323089
i04760772
g02854696
NOTICE

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents