Table of Contents
Advertisement
SEBU8455
Maintenance Section
Refill Capacities
Refill Capacities
Lubrication System
The refill capacities for the engine crankcase
reflect the approximate capacity of the crankcase
or sump plus standard oil filters. Auxiliary oil filter
systems will require additional oil. Refer to the OEM
specifications for the capacity of the auxiliary oil filter.
Refer to the Operation and Maintenance Manual,
"Maintenance Section" for more information on
Lubricant Specifications.
Table 5
Engine
Refill Capacities
Compartment or System
Crankcase Oil Sump
(1)
(1)
These values are the approximate capacities for the crankcase
oil sump which includes the standard factory installed oil filters.
Engines with auxiliary oil filters will require additional oil. Refer
to the OEM specifications for the capacity of the auxiliary oil
filter.
Cooling System
Refer to the OEM specifications for the External
System capacity. This capacity information will be
needed in order to determine the amount of coolant
that is required for the Total Cooling System.
Table 6
Engine
Refill Capacities
Compartment or System
1600A Engine Only
1600A Total System
1600D Engine Only
1600D Total System
i04268391
Maximum
35.96 L (7.9Imp gal)
11.8 L
(2.6 Imp gal)
30.9 L
(6.8 Imp gal)
13.2 L
(2.9 Imp gal)
32.3 L
(7.1 Imp gal)
Fluid Recommendations
•
Glossary
•
ISO International Standards Organization
•
ASTM American Society for Testing and Materials
•
HFRR High Frequency Reciprocating Rig for
Lubricity testing of diesel fuels
•
FAME Fatty Acid Methyl Esters
•
CFR Co-ordinating Fuel Research
•
LSD Low Sulfur Diesel
•
RME Rape Methyl Ester
•
SME Soy Methyl Ester
•
EPA Environmental Protection Agency of the
United States
General Information
NOTICE
Every attempt is made to provide accurate, up-to-date
information. By use of this document you agree that
Perkins Engines Company Limited is not responsible
for errors or omissions.
NOTICE
These recommendations are subject to change with-
out notice. Contact your local Perkins distributor for
the most up-to-date recommendations.
Diesel Fuel Requirements
Perkins is not in a position to continuously evaluate
and monitor all worldwide distillate diesel fuel
specifications that are published by governments and
technological societies.
Table 7 provides a known reliable baseline in order
to judge the expected performance of distillate diesel
fuels that are derived from conventional sources.
Satisfactory engine performance is dependent on
the use of a good quality fuel. The use of a good
quality fuel will give the following results: long engine
life and acceptable exhaust emissions levels. The
fuel must meet the minimum requirements that are
stated in table 7.
47
Maintenance Section
Refill Capacities
i04268521
Hide quick links:
Advertisement
Chapters
Table of Contents
