Making N In 1 Copies - Brother MFC-9840CDW User Manual

Chapter 12
To enlarge or reduce the next copy follow the
instructions below:
a
Make sure you are in Copy mode
b
Load your document.
c
Use the dial pad to enter the number of
copies (up to 99).
d
Press Enlarge/Reduce.
Press c.
e
Do one of the following:
Press a or b to choose the
enlargement or reduction ratio you
want.
Press OK.
Press a or b to choose
Custom(25-400%).
Press OK.
Use the dial pad to enter an
enlargement or reduction ratio from
25% to 400%. (For example, press
5 3 to enter 53%.)
Press OK.
f
Press Mono Start or Colour Start.
Note
• Page Layout Options 2 in 1 (P),
2 in 1 (L), 4 in 1 (P),
4 in 1 (L) are not available with
Enlarge/Reduce.
• (P) means Portrait and (L) means
Landscape.

Making N in 1 copies

(page layout)
You can reduce the amount of paper used
when copying by using the N in 1 copy
feature. This allows you to copy two or four
pages onto one page, which lets you save
paper.
84
Important
Please make sure the paper size is set to
Letter, A4, Legal or Folio.
.
(P) means Portrait and (L) means
Landscape.
You cannot use the Enlarge/Reduce
setting with the N in 1 feature.
a
Make sure you are in Copy mode
b
Load your document.
c
Use the dial pad to enter the number of
copies (up to 99).
d
Press N in 1.
e
Press a or b to choose 2 in 1 (P),
2 in 1 (L), 4 in 1 (P),
4 in 1 (L) or Off(1 in 1).
Press OK.
f
Press Mono Start or Colour Start to
scan the page.
If you placed the document in the ADF,
the machine scans the pages and starts
printing.
If you are using the scanner glass, go
to g.
g
After the machine scans the page,
press 1 to scan the next page.
Flatbed Copy:
Next Page?
a
1.Yes
b
2.No
Select ab or OK
h
Put the next page on the scanner glass.
Press OK.
Repeat g and h for each page of the
layout.
12
i
After all the pages have been scanned,
press 2 in g to finish.
12
.