Turning Off The Scanner Lamp; Lcd Contrast; Dial Prefix - Brother MFC-9840CDW User Manual

Turning off the scanner
lamp
The scanner lamp stays on for 30 minutes
before automatically switching off to preserve
the life of the lamp and reduce power
consumption.
To turn the scanner lamp off manually press
the d and c keys simultaneously. The scanner
lamp will remain turned off until the next time
you use the scanning feature.
Note
Turning the lamp off regularly will reduce
the lamp's life.

LCD contrast

You can change the contrast to make the
LCD look lighter or darker.
a
Press Menu, 1, 8.
18.LCD Contrast
-nnonn+
Select d c & OK
b
Press c to make the LCD darker. Or,
press d to make the LCD lighter.
Press OK.
c
Press Stop/Exit.

Dial Prefix

The dial prefix setting will automatically dial a
3
predefined number before every fax number
you dial. For example: If your telephone
system requires a 9 to dial an outside number
use this setting to automatically dial 9 for
every fax you send.
a
(for New Zealand) Press Menu, 0, 5.
Press Menu, 0, 6.
b
Press a or b to choose On or Off.
Press OK.
If you chose On, go to c.
If you chose Off, go to e.
c
Press 1 or 2 to choose 1.Change or
2.Exit.
3
If you chose 1.Change, go to d.
If you chose 2.Exit, go to e.
d
Enter the prefix number (up to 5 digits)
on the dial pad.
Press OK.
Note
• You can use the numbers 0 to 9, #, l and
!. (Press Hook to display "!".)
You cannot use ! with any other numbers
or characters.
• (Not available in New Zealand) If the pulse
dialing mode is on, # and l are not
available to use.
e
Press Stop/Exit.
General setup
3
3
27