Brother MFC-9840CDW User Manual page 254

ECM (Error Correction Mode)
Detects errors during fax transmission
and resends the pages of the fax that had
an error.
Extension telephone
A telephone on the fax number that is
plugged into a separate wall socket.
External telephone
A TAD (telephone answering device) or
telephone that is connected to your
machine.
F/T Ring Time
The length of time that the Brother
machine pseudo/double-rings (when the
Receive Mode setting is Fax/Tel) to notify
you to pick up a voice call that it answered.
FaxAbility
A subscriber service purchased from the
telephone company that provides another
telephone number on an existing
telephone line. The Brother fax machine
uses the new number to simulate a
dedicated fax line.
Fax Detect
Enables your machine to respond to CNG
tones if you interrupt a fax call by
answering it.
Fax Forwarding
Sends a fax received into the memory to
another pre-programmed fax number.
Fax Journal
Lists information about the last 200
incoming and outgoing faxes. TX means
Transmit. RX means Receive.
Fax Receive Code
Press this code (l 51, l 91 for New
Zealand) when you answer a fax call on
an extension or external telephone.
Fax Storage
You can store faxes in the memory.
Fax tones
The signals sent by sending and receiving
fax machines while communicating
information.
244
Fax/Tel
You can receive faxes and telephone
calls. Do not use this mode if you are
using a telephone answering device
(TAD).
Fine resolution
Fine resolution is 203 × 196 dpi. It is used
for small print and graphs.
Greyscale
The shades of grey available for copying
and faxing photographs.
Group number
A combination of One-Touch and Speed-
Dial numbers that are stored on a One-
Touch key or in a Speed-Dial location for
Broadcasting.
Help list
A printout of the complete Menu table that
you can use to program your machine
when you do not have the User's Guide
with you.
Journal Period
The pre-programmed time period
between automatically printed Fax
Journal Reports. You can print the Fax
Journal on demand without interrupting
the cycle.
LCD (liquid crystal display)
The display screen on the machine that
shows interactive messages during On-
Screen Programming and shows the date
and time when the machine is idle.
Manual fax
When you lift the handset of your external
telephone and then press Hook so you
can hear the receiving fax machine
answer before you press Mono Start or
Colour Start to begin transmission.
Menu mode
Programming mode for changing your
machine's settings.