Brother MFC-9840CDW User Manual page 231

Main Submenu
Menu
7.LAN 1.Wired
Menu Selections
1.TCP/IP 1.BOOT Method
2.IP Address
3.Subnet Mask
4.Gateway
5.Node Name
6.WINS Config
7.WINS Server
8.DNS Server
9.APIPA
0.IPv6
—
2.Ethernet
3.Set to 1.Reset
Default
2.Exit
—
4.Wired
Enable
Options Descriptions
Chooses the BOOT
Auto*
method that best suits
Static
your needs.
RARP
BOOTP
DHCP
[000-255]. [000-255]. Enter the IP address.
[000-255]. [000-255]
[000-255]. [000-255]. Enter the Subnet mask.
[000-255]. [000-255]
[000-255]. [000-255]. Enter the Gateway
[000-255]. [000-255] address.
Enter the Node name.
BRNXXXXXX
Chooses the WINS
Auto*
configuration mode.
Static
(Primary) Specifies the IP address
of the primary or
000.000.000.000
secondary WINS server.
(Secondary)
000.000.000.000
(Primary) Specifies the IP address
of the primary or
000.000.000.000
secondary DNS server.
(Secondary)
000.000.000.000
Automatically allocates
On*
the IP address from the
Off
link-local address range.
Enable or Disable the IPv6
On
protocol. If you want to use
Off*
the IPv6 protocol, visit
http://solutions.brother.com
for more information.
Chooses the Ethernet
Auto*
link mode.
100B-FD
100B-HD
10B-FD
10B-HD
— Restore the wired
network setting to
factory default.
—
Enable or Disable the
On*
wired LAN manually.
Off
Menu and features
Page
See
Network
User's
Guide on
the
CD-ROM.
221
D