Rear Facing Seat & Foot Rest - Ezgo RXV ELECTRIC Service & Repair Manual

Read all of Section B and this section before attempting any procedure. Pay particular attention to all Notes, Cautions and Warnings.
Installation is in the reverse order of removal.
Replace any worn or damaged hardware with new as
required.
2 + 2 Rear Facing Seat & Foot
Rest
Tool LIst
Torx Bit, T-45 IP........................................................... 1
Socket, 15 mm ............................................................ 1
Ratchet ........................................................................ 1
Torque Wrench, ft. lbs. ................................................ 1
Wrench, 15 mm ........................................................... 1
1. Remove four hex head bolts (10) that secure the seat
bottom to the hip restraints.
2. Lift the seat bottom (11) up and remove it from the
vehicle.
SEAT BACK
SUPPORT
DRIVER SIDE
HIP RESTRAINT
Fig. 11 2 + 2 Rear Facing Seat & Foot Rest
Qty.
Repair and Service Manual
ITEM TORQUE SPECIFICATION
35 6 - 9 ft. lbs. (8 - 12 Nm)
37 10 - 13 ft. lbs. (14 - 17 Nm)
SEAT BACK
Fig. 12 Rear Facing Seat Bottom
BODY
SEAT BOTTOM
PASSENGER SIDE
HIP RESTRAINT
FOOT REST
Page C-7
B
B