Take-Up Belt, Paper Exit Roller; Inlet Port Gate - Sharp MX-FNX9 Service Manual

(9) Take-up belt, paper exit roller

1) Remove the inner finisher from the main unit. Refer to A-(1).
2) Remove the inner cover. Refer to A-(2).
3) Remove the reverse guide unit. Refer to A-(5).
4) Remove the parts, and remove the bundle roller up/down lever
unit.
2
1
5) Remove the parts, and remove the bundle roller unit.
1
6) Remove the parts, and pull out the belt unit. Remove the parts,
and remove the belt unit.
1
1
2
1
3
2
MX-FNX9 DISASSEMBLY AND ASSEMBLY 6 – 4
7) Remove the parts, and remove the take-up belt and the paper
exit roller.
2
2
2
3

(10) Inlet port gate

1) Remove the inner finisher from the main unit. Refer to A-(1).
2) Remove the inner cover. Refer to A-(2).
3) Remove the left cover and the bottom cover. Refer to A-(4).
4) Remove the reverse guide unit. Refer to A-(5).
5) Remove the PWB. Refer to F-(1).
6) Remove the flapper solenoid. Refer to B-(2).
7) Remove the slide rail. Remove the slider fixing bracket and
remove the earth terminal.
3
3
1
1
2
1