(2) Saddle finisher control PWB fixing parts
1)
Remove the control PWB. (See (1).)
2)
Remove the screw, and remove the PWB fixing part.
2. Paper Transport Section (MX-RBX3)
A. Paper Pass Unit
1)
Pull out the paper pass unit, and remove the screw.
2)
Free the lock, to remove the paper pass unit.
(1) Paper transport unit entry sensor
1)
2)
(2) Paper transport unit exit sensor
1)
2)
(3) Upper Guide Flapper
1)
2)
MX-FN10 DISASSEMBLY AND ASSEMBLY 6 – 7
Remove the paper pass unit.
Remove the paper transport unit entry sensor.
Remove the paper pass unit.
Remove the bracket, and remove the paper transport unit exit
sensor.
Remove the paper pass unit.
Open the upper transport unit, remove each parts, and remove
the reverse gate.
1
2
3