Setting The Number Of Rings For Manual Reception; Selecting The Reception Paper Size - Sharp ARFX13 - Fax Interface Card Operation Manual

SETTING THE NUMBER OF RINGS FOR MANUAL RECEPTION

The number of rings before the machine answers in MANUAL mode can also be set.
If you do not want the machine to answer at all in MANUAL Mode, select "0" in Step 4 below.
1
Press the [MENU] key.
1,2,3,
1,2,3,
SP. FUNC
2
Press the [ ] key (
until "4:USER PROGRAM" appears,
and then press the [OK] key.
Selection
"4:USER PROGRAM"
3
Press the [ ] key (
until "5:# OF RINGS (MANUAL)"
appears, and then press the [OK] key.
Selection
"5:# OF RINGS (MANUAL)"

SELECTING THE RECEPTION PAPER SIZE

Set the size of paper to be used to print received faxes. A size setting other than "A4", "8.5x11", or "8.5x14" is
regarded as out of paper. To set the paper size, see "LOADING PAPER" in the Operation Manual (for general
information).
) or [ ] key ( )
) or [ ] key ( )
4
Press a numeric key to select the
number of rings.
5
Press the [OK] key.
1,2,3,
1,2,3,
SP. FUNC
6
Press the [MENU] key.
1,2,3,
1,2,3,
SP. FUNC
INITIAL SETTINGS
Select the number of
rings you would like to
use (0 to 9).
Press the [MENU] key to
exit.
29
2