[6] DISASSEMBLY AND
MX-FNX9
ASSEMBLY
1. MX-FNX9
A. Exterior
(1) Inner finisher
1)
Loosen the screw, and disconnect the connector from the main
unit.
2)
Open the front cover, and remove the punch unit cover.
1
3)
Remove the stopper.
4)
Remove the screw, and remove the rail stay.
5)
Remove the inner finisher from the main unit.
Service Manual
(2) Inner cover
1)
2)
2
(3) Rear cover
1)
2)
(4) Left cover, bottom cover
1)
2)
MX-FNX9 DISASSEMBLY AND ASSEMBLY 6 – 1
Remove the inner finisher from the main unit. Refer to A-(1).
Remove the inner cover.
Remove the inner finisher from the main unit. Refer to A-(1).
Slide the rail, and remove the rear cover.
1
Remove the inner finisher from the main unit. Refer to A-(1).
Remove the left cover and the bottom cover.
2
2
1