C. Motors, solenoids, and PWB
(1) MX-FNX9
3
5
4
6
11
2
No.
Signal
1
FFSM
Staple motor
2
FSM
Staple shift motor
3
FTLM
Tray motor
4
FFJM
Alignment motor F
5
FRJM
Alignment motor R
6
FSWM
Roller upper/lower roller
7
FAM
Bundle exit motor
8
FRM
Transport motor
9
FPDS
Paddle one-rotation solenoid
10
FSLS
Paper surface detection solenoid
11
FBRS
Belt separation solenoid
12
FINRPS
Flapper solenoid
13
FFAN
Fan
14
–
Control PWB
Name
Drives the stapling mechanism. (Stapler unit built-in motor)
Shifts the stapler unit in the F/R direction.
Drives the paper load tray up/down.
Drive the alignment guide on the F side.
Drive the alignment guide on the R side.
Drives the bundle exit roller up/down.
Drives the bundle exit roller and the paddle.
Drives the inlet port roller, the feed roller, and the take-up belt.
Trigger solenoid for paddle one-rotation.
Drives the lever for paper holding and detection of the tray paper surface.
Trigger solenoid for up/down shift of the take-up belt.
Drives the flapper to select the entry path between the finisher inside and the reverse path.
Cools the inlet port of the finisher.
Controls the inner finisher.
MX-FNX9 EXTERNAL VIEW AND INTERNAL STRUCTURE 4 – 4
Function
14
12
9
8
7
1
10
13