MEMORY SWITCH CONFIGURATION
DPP-350 has 10 memory switches, which have the following action:
SW1: Enable/Disable buzzer.
•
SW2: Disable CR / CR is executed as LF
•
SW3: Enable/Disable LF
•
SW4: LF immediately after CR/ Disable LF immediately after CR
•
SW5: Font A (12x24)/ Font B (9x16)
•
SW 6: Enable/Disable "Cover open" sensor.
•
SW 7: Enable/Disable IrDA module
•
SW8: Prevents others from discovering printer when set to ENABLE.
•
Must be set after pairing is completed.
SW9: Disable/Enable USB. Allow the use of USB port for
•
communications.
SW10: (OFF) set USB as the host mode. Host/Device
•
USER MANUAL
17
Need help?
Do you have a question about the DPP-350 and is the answer not in the manual?