Recalling Previous Job Settings - Oce CS655 Pro User Manual

Advanced information
13.5

Recalling previous job settings

Follow the procedure below to copy with a previous job settings.
0 Only the last-completed output job settings can be recalled as the previous job settings. Non-
completed job or reserve job settings cannot be recalled, even if the setting operations have been made
last.
0 The previous job settings can be recalled even after the machine power is turned off then on.
1
Position the original.
2
Press [Mode Memory] on the control panel.
The Mode Memory Screen will be displayed.
3
Touch [Pre-Job Recall].
The [Job Check] key will be active on the screen.
4
Touch [Job Check] to review the settings.
– The Mode Check Screen will be displayed. Check the settings of the previous job on the screen.
– Recalled settings can be altered from this screen. See page 13-3 for details.
5
Touch [OK].
The settings of the previous output job will be recalled on the Copy Screen.
6
Press [Start] to print.
CS655 Pro
13
13-11