Changing Colors Using Rgb Values - Oce CS655 Pro User Manual

Color adjustment
10.4

Changing colors using RGB values

Change the color by modifying each value of red (R), green (G), and blue (B).
Note
In Full Color mode, this adjustment properly reflects on the strength of each color (red, green, and blue)
reproduced on a printed image.
Using Black or Single Color mode, this adjustment will operate to the reproducibility of each color of
colored original, giving effect to the strength of black or single color on a printed image.
!
Detail
To reproduce the yellow part of the original which cannot be printed normally in Single Color mode,
make the Red stronger.
To change the hue of the printed image in Single Color mode, see "Changing colors using CMYK value"
on page 10-35.
To modify RGB value
1
Position the original.
2
Touch [Quality Adjust.] on the Copy Screen.
The Quality Adjustment Screen will be displayed.
3
Touch the desired color key.
The Red, Green, or Blue Adjustment Screen will be displayed.
CS655 Pro
10
10-19