Punching File Holes In Copies (Punch) - Oce CS655 Pro User Manual

Output applications
12.4.6

Punching file holes in copies (Punch)

The Finisher FS-607 with Punch kit PK-512/PK-513 installed can punch file holes in output copies.
Reminder
Do not punch special paper type such as labels, tracing paper, etc. Otherwise, machine trouble may
occur.
Be sure that the side guide plates of the paper tray are securely aligned to the paper; otherwise the
copies may not be punched in position.
!
Detail
For detailed specifications, see page 3-3 and page 7-6.
1
Position the original.
2
Touch [Punch] on the Copy Screen.
– Punched sheets will be delivered to the primary (main) tray. The Output Application icon shows the
number of punch holes and punch position currently selected.
– If you want to change the number of punch holes and punch position, proceed to the following
steps.
3
Touch [Output Appli.] on the Copy Screen.
The Output Application Screen will be displayed.
CS655 Pro
80 mm
80 mm
21 mm
70 mm
21 mm
12
12-25