Programming Different Settings For An Output Job: Program Job - Oce CS655 Pro User Manual

11
11.8

Programming different settings for an output job: Program job

In the ordinary Separate Scan mode, the combined features selected for the job are applied to all originals to
be scanned. Using Program Job, you may scan multiple sets of originals and apply different settings on each
set (referred to as job), then output them all as a complete set.
0 Separate Scan mode is automatically selected.
0 Output mode and print quantity setting cannot be specified for each job. The last setting made will be
applied to all jobs.
0 The paper size specified for the first job will be applied to all subsequent jobs.
0 Max. 100 jobs can be programmed for an output job.
0 Program Job settings cannot be stored in Program Memory.
1
Position the original.
2
Touch [Application] on the Copy Screen.
3
Touch [Program Job] on the Application Screen.
The incompatible function keys will be dimmed to show inactivity.
4
Touch [OK] on the Application Screen.
The Copy Screen will be restored, with highlighted [Program Job] key displayed under the [Application]
key.
This key can also be used to display the Application Screen for making setting change.
The [Separate Scan] key on the Copy Screen also appears highlighted to show that the Separate Scan
mode is automatically selected.
5
Select additional copy conditions, as desired.
– The paper size determined at this time will be applied to all subsequent jobs.
11-26
Original A Original B
Original C
Application functions
Output using
Program Job
CS655 Pro