Moving A Track (Move) - JVC XM-448BK Instructions Manual

EDIT
OR
SET
OR
OR
SET
OR
SET
22

Moving a track (MOVE)

A track can be moved to the desired position by selecting its track number and the
destination track number.
1 Press EDIT on the main unit or on the remote control unit
to select "MOVE".
The MOVE indicator lights up.
Each press of the button switches the editing functions as follows.
DIVIDE
(MD total playing time display or Disc title)
2 Press SET on the main unit or on the remote control unit.
The current track number will blink on the display.
3 Select a track number to be moved, then press SET.
Select a track number by turning the jog dial on the main unit or by pressing < / 4 or
¢ / > on the remote control unit.
Then press SET on the main unit or on the remote control unit.
Blinks
Example) When track No. 2 is to be moved
• You can also use the numeric keys on the cover panel of the remote control unit to
select a track number, then press SET. To select a track, see "Selecting a track with
the numeric keys" on page 9.
If you selected a wrong track number, press 7STOP/CANCEL on the main unit or
•
CANCEL on the remote control unit and select the correct track number.
4 Select the movement destination track number, then
press SET.
Select another track number to be given to the selected track by turning the jog dial on
the main unit or by pressing < / 4 or ¢ / > on the remote control unit.
Then press SET on the main unit or on the remote control unit.
Blinks
Example) When track No. 5 is selected
• You can also use the numeric keys on the cover panel of the remote control unit to
select the track number, then press SET. To select a track, see "Selecting a track
with the numeric keys" on page 9.
If you selected a wrong track number, press 7STOP/CANCEL on the main unit or
•
CANCEL on the remote control unit and repeat from step 3.
JOIN MOVE ERASE
Canceled
Blinks
1 2 3 4 5
6
Blinks
Blinks
1 2 3 4 5
6
ALL ERASE
Blinks
1 2 3 4 5
6
Blinks
Blinks
1 2 3 4 5
6
Blinks
SET
Blinks
SET
Blinks