Programming The Playingorder Of The Tracks; Program Play - JVC MX-GC5 Instructions Manual

Continued
Programming the PlayingOrder of the Tracks
--Program Play
You ctm arrtmge the order in which the tracks play before you
start playing. You can program up to 32 tracks.
_ Program play is not availahle to MP3 discs on this unit
There may be a malfunction ill case that you try to do such
playback,
If a malfunction occurs, unplug the AC power cord and then plug it
back ill.
On the remote control ONLY:
1
Load discs.
• If the current playing source is not the CD player, press
CD I_/11, then • before going to the next step.
2 Press PROGRAM/RANDOM
repeatedly until "PROGRAM"
appears on the display.
The PROGRAM indicator also lights up on
the display.
PROGRAM:
?-' T3_ F_-, ',;'F-,' ,," "
PROG_ _"
TRACK
• If a program has been stored in memory, the program is
called up.
Press one of the disc
=,1
cD= =.a
number buttons (CD1,
CD2, and CD3) to select the
disc number you want to play.
• When the selected disc number is zm MP3 disc,
_ 3 MR DISC" appears on the display.
Disc number
Program step number
I
I
P_OGRAM_"
Track number
4 Press the number button(s) to 1_ 1_) 1_
select the track number.
Ex.: For track number 5, press 5.
For track number 20, press +10,
then l 0.
For track number 32, press + 10,
+10, +10, then 2.
®®®
(D®®
Each time you select a track, the selected track number is
added to the track number indicator.
• You can select up to the 99th track o13each disc.
t .. i I.t I_.l I-7! / P,OGRAM,
\
!
I
I
IL! I
TRACK
5 Program other tracks you want.
• To program tracks from the same disc, repeat step 4.
• To program tracks from a different disc, repeat steps 3
_md 4.
6 Press
CD I_/11.
The tracks are played in the order you have
programmed.
CD
To stop during play, press l
To exit from Program play, press • during play or
PROGRAM/RANDOM again before or after play.
The unit enters continuous playback. (The pregmm you have
made is stored in memory until you turn off the unit, open the
carrousel, or erase the pregram.)
Tomodify the program
Before playing, you can erase the last programmed CA.CEL
track shown on the display by pressing CANCEL.
• Each time you press the button, the last
programmed track is erased frem the pregram.
To add tracks in the program before play, simply select the
disc numbers _md/or track numbers you w_mt to add by
following steps ,3 _md 4 of the programming precedure.
To check the program before play, perfoml the following
procedure:
I Press PROGRAM/RANDOM while Pregram play is
stopped.
2 Press I_1_1or bql_l.
The pregrammed tracks appear o13 the display in the
programmed (or reverse) order.
• Pressing CD I_/11 starts Program play from the first track of
the program.
lf you want to add tracks in the program after
checking the program
Press PROGRAM/RANDOM repeatedly until the PROGRAM
indicator appears on tile display, then add tracks by following steps
3 and 4 of the programming procedure,
To erase the entire program, press • while
Program play
is
stopped.
• Turning the power off or ejecting the carrousel will also
erase the stored memory.
lf you try to add another track when 32 tracks are
ah'eady programmed
"FULL" appears on tile display.
lf you have programmed a track from an empty tray,
o1"a track numher that does not exist on the disc
Such program steps will be skipped and erased.
18