Table of Contents
Advertisement
58
Optional Equipment
Installation Overview
The optional heat duct allows the fireplace to transfer heat to separate locations in the home.
Installation should take place prior to installing drywall.
Warning:
This kit must be installed as specified in these instructions. Do not modify any
component.
Warning:
Use of any external blower other than the Travis Power Heat Duct Blower will void the
warranty and listing of this appliance and may create a fire hazard.
Note:
The power heat duct must be installed by a qualified service technician.
Note:
Some building codes may require the use of firestop spacers whenever the duct passes
from room to room.
Note:
When routing ducts through a cold area (e.g. crawl space) we recommend insulating
the duct with fiberglass insulation. If paper-backed insulation is used, the paper can
not contact the duct.
Note:
One or two het duct kits may be used.
Electrical Source
Junction Box
Rheostat
(with cover plate)
Use 10" x 3-1/4"
wall stack (duct)
when passing
through tight
areas.
Grill
Travis Industries
Maximum Duct
Length = 20'
Wall Adapter
(for use on
2 x 4 walls)
(for qualified installers only)
Floor
Boot
4080214
Blower
Box
Duct Adapter
(6" Round to 10" x 3-1/4")
6" Duct
Starter Ring
100-01182_003
Advertisement
Table of Contents
