Table of Contents
Advertisement
Electrical Connection (required)
•
The electrical line to the grounded receptacle inside the fireplace must be installed by a
qualified installer and must meet all local codes.
•
Make sure the household breaker is shut off prior to working on any electrical lines.
•
The fireplace must be properly grounded in accordance with local codes (or ANSI/NFPA 70-1987)
•
The electrical line must be a min. 14 gauge, and supply 120 Volts at 60 Hz (2 Amps)
Caution:
Label all wires prior to disconnection when servicing controls. Wiring errors can cause
improper and dangerous operation.
Grounded Receptacle
Junction Box Assembly
Grounded 110V
Power Supply
© Travis Industries
Installation
(for qualified installers only)
Receptacle Cover Plate
Strain Relief
Left Side of Fireplace
4080214
19
100-01182_003
Advertisement
Table of Contents
