Travis Industries 864 HH Installation Manual page 18

Built-in direct vent fireplace
Hide thumbs Also See for 864 HH:
Table of Contents

Advertisement

18
Gas Line Location
Left Side Gas Inlet (preferred)
A 2" high by 3" wide opening is located
behind the gas inlet cover plate (it is 2"
above the base of the fireplace).
You may remove this cover plate to
install the gas line. The cover plate has
a 7/8" diameter hole (covered with a
push plug). By rotating the plate 180°
the hole may be re-located. You may
also secure the plate in a customized
location using the self-drilling screws.
Right Side Gas Inlet
The Gas Inlet is
3/8" FPT
© Travis Industries
Installation
(for qualified installers only)
The Gas Inlet is
3/8" FPT
6-3/4"
18"
A 2" high by 3" wide opening is located
behind the gas inlet cover plate (it is 1-3/8"
above the base of the fireplace).
6-1/4"
A 12" flex tube and shutoff valve is
included with the fireplace. The shutoff
valve accepts a 1/2"MPT.
You may remove this cover plate to install the gas line. The
cover plate has a 7/8" diameter hole (covered with a push
plug) in line with the gas inlet on the gas control valve. By
rotating the plate 180° the hole may be re-located. You may
also secure the plate in a customized location using the self-
drilling screws.
4080214
A 12" flex tube and
shutoff valve is included
with the fireplace. The
shutoff valve accepts a
1/2"MPT.
100-01182_003

Advertisement

Table of Contents
loading

Table of Contents