Thick Facing Installation With Fpx Arched Faces - Travis Industries 864 HH Installation Manual

38
Thick Facing with Fireplace Xtrordinair (FPX) Arched Faces
The following illustration shows facing considerations for those fireplaces utilizing FPX arched faces.
The facing must be non-combustible and over 1" in depth.
The Fireplace Xtrordinair 864
Masonry Template is
recommended for masonry
installation (sku 98500688). The
template helps locate and
support the masonry as it being
installed.
Before installing masonry, install
the FPX Face Upgrade Kit
(98500686). This covers the
upper corners.
TOP VIEW
Framing
Nailing Bracket
Fireplace
Face
Masonry
Travis Industries
Installation
Drywall
(for qualified installers only)
Masonry Line
Floor-Mounted Fireplaces or Raised Hearths:
Build the hearth 1" (max.) above the base of the
fireplace. The fireplace may be raised to
accommodate thicker hearth materials.
Raised Fireplaces:
Masonry is installed 1" (maximum)
above the base of the fireplace.
FRONT VIEW
41"
4080214
Fiber Board (must remain in place)
45-1/2" Radius
1-1/2"
5"
35-3/4"
1"
100-01182_003