Using The Numeric Keypad - Fuji Xerox DocuWide 6035 Quick Manual

Fitting the image to a fixed copy size
● By selecting the desired copy size, you can easily make copies with scaling.
Document A0
Menu
Language
Copy
Scan Setup Menu
Stored
Programming
Basic Image More
Copy Quality Features
Reduce/Enlarge Media Supply Media Type
Auto
100.0%
Select
1 ISO A0
Auto%
Bond
50.0%
2 ISO A2
- A2
A0 >
Bond
More... More...
Cancel
Media Supply
Auto
Select ISO A0
ISO A1
Standard ISO A2
Size
ISO A3
ISO A4
Media
JIS B1
Source
Transmitting
Copy Scan Menu
Job in memory
Job Status
Interrupt
Machine Status
Log In/Out
Media A1
Auto R/E
Bond
Vellum
Film
Media Cut Mode
Close
JIS B2
JIS B3
JIS B4
8.5 x 11"
9 x 12"
11 x 17"
Copy from
Memory
Power Saver
Clear All
Stop
Start
Various sized documents
A0
A1
A4
1
Select [Copy].
2
Select [Auto%] for [Reduce/Enlarge]
and select the desired standard size for
[Media Supply].
When the desired standard size is not
listed, select [More].
Note
If you select the [Auto R/E] check box, you can
copy according to setting determined in
advance. Refer to User Guide P.59.
3
Select the desired standard size for
[Standard Size], and select [Close].
Note
Trays can be specified instead of media size.
Refer to User Guide P.58.
4
Enter the number of copies (1 to 99)

using the numeric keypad.

5
Set the document in portrait orientation.
Align the document face down with the document guide.
The document will be scanned automatically, and copied.
Note
• The standard size document can be placed in
landscape orientation.
Stop
• Press
Media
A4
to stop copying.
Copy
7