Items Relating To Recording Protection (501 - Sony SRW-5001 Operation Manual

Menu List

Items Relating to Recording Protection (501~)

Item number Item
STILL TIMER
501
502 TAPE
PROTECTION
MODE FROM
SEARCH
503 TAPE
PROTECTION
MODE FROM
STOP
504 DRUM ROTATION
IN STANDBY OFF
505 STILL TENSION
A-26
Appendix
Setting
Function
0.5 sec Select the amount of time after which the VTR to
5 sec automatically enters tape-protect mode, for the purpose of
protecting the video head and tape.
10 sec
This is the time between stopping of the tape (stop mode or
20 sec
still-picture mode in search mode) and the change to tape-
30 sec
protection mode.
40 sec
The selectable range of time is from 0.5 second to 30
50 sec
minutes.
1 min
2 min
3 min
4 min
5 min
6 min
7 min
[8 min]
30 min
[step fwd] Specifies the tape-protect mode to which the VTR changes
standby off from still-picture mode while searching.
The unit enters automatically the specified tape-protect
tension release
mode after the time specified in item 501 has elapsed.
step fwd: A two-second step advance is repeated in forward
standby off: The VTR enters standby off mode (standby is
tension release: The VTR enters tension release mode
[standby off]
Specifies the tape-protect mode to which the VTR changes
tension release to from the stop mode.
The unit automatically enters the specified tape-protect
mode after the elapse of time specified by item 501.
standby off: The VTR enters standby off mode (standby is
tension release: The VTR enters tension release mode
[off]
Sets the drum rotation to on or off during standby-off mode.
on off: Drum rotation is stopped.
on: Drum rotation continues.
[normal] Sets the tape tension control in still-picture mode.
loose normal: Maintains the tape tension that ensures uneffected
loose: Sets the tape tension lower than that of the "normal"
direction at 1/30 times normal tape speed.
canceled).
(tape tension is released).
canceled).
(tape tension is released).
playback even in still-picture mode.
(This is the normal setting for VTR operations.)
setting after the VTR enters still-picture mode. In this
case, picture playback is not ensured. (For long
standbys (e.g., LMS) in still-picture mode, this setting is
recommended.)