Registering And Storing Menu Settings; Menu Configuration; Changing Menu Settings - Sony SRW-5001 Operation Manual

4-1 Registering and Storing Menu Settings

The operating conditions of the VTR are set using the
menu operation section on the lower control panel.
Menu items are divided among eight different menus
(HOME, TC, VIDEO, AUDIO, CUE, PF1, PF2, SET
UP).
You can register any frequently used items to the
HOME, TC, VIDEO, AUDIO, PF1, and PF2 menu
screens. By registering the necessary items in advance,
setting operations are made quicker. The contents of
the eight VTR memory banks can, in turn, be stored on
a memory stick for later recall.

4-1-1 Menu Configuration

This VTR has two kinds of menus.
VTR SETUP menu
This menu contains items that specify the initial
operating conditions of the VTR. You can change
these settings directly without registering the items to
the function buttons.
Press the [F6] (VTR SETUP) button in the SET UP
menu to display this menu.
For details on setting operating conditions of the VTR, see
"4-7-1 VTR SETUP Menu" on page 4-65.
PF ASSIGN menu
This is a list of menu items which can be registered to
the HOME, TC, VIDEO, AUDIO, PF1 and PF2 menu
screens as well as the screen that is displayed by
pressing the ALT button (the ALT screen). This
includes all VTR setup menu item.
Press the [F4] (PF ASSIGN) button in the SET UP
menu to display this menu.
For details on registering items, see "4-1-3 Registering
Items to the VTR SETUP Menu" on page 4-2.
The menu configuration of the VTR is shown in the
following figure.
HOME menu
TC menu
VIDEO menu
AUDIO menu
PF1 menu
Registration
PF2 menu
CUE menu
SETUP menu
[F4] (PF ASSIGN) button
[F6] (VTR SETUP) button
PF button assignment allows you to assign the same
item also to a different menu screen or button.

4-1-2 Changing Menu Settings

To activate the HOME, TC, VIDEO, AUDIO, CUE,
PF1, PF2, or SET UP menu, press the respective menu
button.
Menu items are assigned to function buttons ([F1] to
[F10]) in each menu. When two items are registered to
the same function button, you can display the second
item by pressing the ALT button.
The example below describes the procedure for
changing the setting specified by the ALT button and
[F6] (CHARA SUPER) button in the TC menu.
1
2 3
PF button 1&2
ASSIGN menu
VTR SETUP
menu
4-1
Chapter 4 Menu Settings