Sony SRW-5001 Operation Manual page 185

Hd digital videocassette recorder format converter board digital betacam processor board rgb processor board
Table of Contents

Advertisement

Item number
Item
A06
PD
SUPERIMPOSED
TIME CODE ID
A07
PD CHARACTER
24F TIME CODE
MODE
A08
FC REFERENCE
select
A10
TC sense data
select
Setting
Function
[off]
When item 620 and A03 is set to "on," specifies whether or
not the ID (24F/30F) is displayed to the right of
on
superimposed time code.
off: No ID is displayed.
on: ID ("24F" or "30F") is displayed.
Note
The setting of this item is effective only when the operation
mode of this unit is set to 23.98PsF or 24PsF.
[off]
When item 620 and A03 is set to "on," specifies whether or
on
not the 2 : 3 pull down 24-frame time data is inserted to the
first line instead of 30-frame time data.
off: 30-frame time data is displayed.
on: 24-frame time data is displayed.
Note
The setting of this item is effective only when the operation
mode of this unit is set to 23.98PsF or 24PsF.
extrn HD
Selects the signal to be the reference for the FORMAT
CONV. OUT input to the REF. INPUT 2 connector.
[extrn SD]
extrn HD: Use the HD reference signal input to the REF.
extrn SD: Use the SD reference signal input to the REF.
[24F]
When the operating frequency is set to 23.976PsF, specifies
whether or not the 30-frame/sec time code information of
30F
pull down output signal and down-converted output signal is
returned when time code sense command is input through
the 9-pin connector.
24F: 24-frame/sec time code information of main output
30F: 30-frame/sec time code information of pull down
Notes
• Pull down output signal and 30-frame/sec time code are
synchronized only when this unit is set to PLAY LOCK
mode. To synchronize the signals, set item A05 "PD EXT
SD REF LOCK MODE" to "lock2."
• Machine-to-machine editing using the pull down output
signal with a VTR operating in 30F mode may not function
properly if the VTR in 30F mode is engaged in player sync.
INPUT 2 connector as the FORMAT CONV. OUT
reference signal.
INPUT 2 connector as the FORMAT CONV. OUT
reference signal.
signal is returned.
output signal and down-converted output signal is
returned.
A-47
Appendix

Advertisement

Table of Contents
loading

This manual is also suitable for:

Srw-5003Srw-5002Srw-5000

Table of Contents