Sony SRW-5001 Operation Manual page 62

Hd digital videocassette recorder format converter board digital betacam processor board rgb processor board
Table of Contents

Advertisement

4-3 TC Menu
Selecting the time code and the user bits to be recorded
Use the [F6] (REGENE SOURCE), [F7] (TCG
MODE), and [F9] (DF/NDF) buttons in the TC menu
to specify the time code and the user bits to be
recorded. The specifications for the various button
settings are shown in the following table.
[F7] (TCG MODE) [F6] (REGENE SOURCE) [F9] (DF/NDF) Time code and user bits recorded
prst
2)
regene
int-L
int-V
ext-L
SDI-V
SDI-L
auto
1) The DF/NDF setting on the [F9] button is applied to the
time code only when "prst" is specified by the [F7]
button; the DF/NDF setting is always applied for the
CTL timer.
2) Specify the signal to be regenerated with the VTR
SETUP menu item 608 "TCG/UBG REGENE MODE".
Signals not specified by this menu item are automatically
set to Preset mode, regardless of the [F7] button setting.
4-22
Chapter 4 Menu Settings
DF/NDF/
TC/UB enables TUG/UBG values to be recorded. Any time
1)
auto
code can be specified for the time code generator and the user
bits generator. The running mode for the recorded time code
data conforms to that specified by the [F9] button.
TC/UB enables TUG/UBG values to be recorded. The time
code generator and the user bits generator lock to the time
data recorded longitudinally on the tape.
TC/UB enables TUG/UBG values to be recorded. The time
code generator and the user bits generator lock to the time
data recorded in the video signal AUX data area on the tape.
TC/UB enables TUG/UBG values to be recorded. The time
code generator and the user bits generator lock to the time
data input from the TIME CODE IN connector.
TC/UB enables TUG/UBG values to be recorded. TUG/UBG
values are controlled by VITC time data in the video signal
input to the HD SDI INPUT A/B connector.
TC/UB enables TUG/UBG values to be recorded. TUG/UBG
values are controlled by LTC time data in the video signal
input to the HD SDI INPUT A/B connector.
"regene/int-L" is set in assemble or insert mode and "prst" is
set in other modes.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Srw-5003Srw-5002Srw-5000

Table of Contents