Items Relating To Remote Interface (201 - Sony SRW-5001 Operation Manual

Menu List

Items Relating to Remote Interface (201~)

The values enclosed in a box are factory settings.
Item number Item
201 REMOTE 9-PIN
202 REMOTE 50-PIN
203 PARALLEL
RUNNING
204 VIDEO REMOTE
CONTROL
SELECT
205 REMOTE
NETWORK
A-22
Appendix
Setting Function
[off]
When this is set to "on," this unit is controlled from the
device connected to the REMOTE 1-IN(9P)/REMOTE 1-I/
on
O(9P) connectors.
Note
When this unit is controlled by a device connected to the
REMOTE 1-IN(9P) or REMOTE 2 PARALLEL I/O (50P)
connectors, the editing control buttons and all of the tape
transport buttons except STOP and EJECT are disabled. It
is also possible to make a setting so that all of the buttons
are disabled.
For details, see item 008.
[off]
When this is set to "on," this unit is controlled from the
device connected to the REMOTE 2 PARALLEL I/O (50P)
on
connector.
[disable]
Selects whether two or more VTRs can be operated
synchronized.
enable
disable: Synchronized operation is not carried out.
enable: Synchronized operation is enabled.
Note
For synchronized operation to be possible, this item must
be set to "enable" on all of the connected VTRs.
UP&DOWN CONVERT For control from an HKDV-900/503 or similar connected to
the VIDEO CONTROL (15-pin ) connector, selects which
UP CONVERT
of the up converter and down converter is controlled.
[DOWN CONVERT]
DOWN CONVERT: Controls down converter.
CONVERT
UP CONVERT: Controls up converter.
UP&DOWN CONVERT: Controls up converter and down
on Specifies whether or not control from a network is
possible.
[off]
on: Allows control from a network.
off: Does not allow remote control from a network.
converter.