Sony SRW-5001 Operation Manual page 170

Menu List
Item number Item
631 ORIGINAL TC
display
JUMPING TC
632
select
A-32
Appendix
Setting Function
When item 630 is set to "on," this setting specifies whether
[off]
the 24-frame time code is displayed or not on the control
on
panel of the VTR before conversion.
off: The 24-frame time code is not displayed before
on: The 24-frame time code is displayed before conversion.
[---3H] When the 24-frame time code is converted to 25-frame time
code, this setting specifies the loopback point (JUMPING
–2H
TC) with respect to the reference point for conversion
–1H
(STARTING TC).
–3H: The JUMPING TC is set 3 hours before STARTING
+1H
+2H
–2H: The JUMPING TC is set 2 hours before STARTING
+3H
–1H: The JUMPING TC is set 1 hour before STARTING TC.
0H
+1H: The JUMPING TC is set 1 hour after STARTING TC.
+2H: The JUMPING TC is set 2 hours after STARTING TC.
+3H: The JUMPING TC is set 3 hours after STARTING TC.
0H: The JUMPING TC is set 1 frame before STARTING TC.
conversion.
The type of time code displayed is specified by item 603.
TC.
TC.