Sony SRW-5001 Operation Manual page 141

Hd digital videocassette recorder format converter board digital betacam processor board rgb processor board
Table of Contents

Advertisement

Digital audio system
Digital audio signal format (CH-1 to CH-12)
Sampling frequency
48 kHz (synchronized with video)
Quantization
24 bits/sample
Wow and flutter
Below measurable level
Headroom
Selectable settings: 20, 18, 16, 15,
and 12 dB
De-emphasis
T1=50 µs, T2=15 µs (automatically
selected in playback mode)
Analog output
D/A quantization 24 bits/sample
Frequency response
20 Hz to 20 kHz +0.5 dB/–1.0 dB
(0 dB at 1 kHz)
Dynamic range
More than 96 dB (at 1 kHz)
Distortion
Less than 0.05% (at 1 kHz,
emphasis on, reference level)
Crosstalk
Less than –80 dB (at 1 kHz,
between any two channels)
Input connectors
HD SDI INPUT A/B
BNC (1 + 1 INPUT MONITOR)
HD SDI (1.485 Gbps) (conforms to
SMPTE 292M/BTA S-004B)
REF. INPUT 1, REF. INPUT 2 (OPTION)
BNC (2 + 2 loop-through)
HD
Trilevel SYNC
0.6 V p-p, 75 Ω, sync negative
SD
Black burst
0.286 V p-p, 75 Ω, sync negative
Selecting HD or SD in a menu
DIGITAL I/O (AES/EBU) INPUT
BNC (6)
CH1/2 to CH11/12
AES/EBU format, unbalanced
TIME CODE IN
XLR 3-pin, female (1)
0.5 to 18 Vp-p, 10 kΩ, balanced
Output connectors
HD SDI OUTPUT
BNC (3, MONITOR with
superimposed text)
1, 2 and MONITOR
SDI (1.485 Gbps) (conforms to
SMPTE 292M/BTA-S004B)
SD SDI OUT
BNC (3, MONITOR with
superimposed text)
SD OUT
COMPOSITE (SUPER)
1.0 Vp-p, 75 Ω, sync negative
SYNC
Black burst
0.286 Vp-p, 75 Ω, sync negative
FORMAT CONV. OUT (OPTION)
(when the optional HKSR-5001 is
installed)
BNC (2, with superimposed text)
HD REF. OUT
BNC (2)
1125 SYNC
Trilevel SYNC
0.6 Vp-p, 75 Ω, sync negative
DIGITAL I/O OUTPUT (AES/EBU)
BNC (6)
CH1/2 to CH11/12
AES/EBU format, unbalanced
AUDIO OUTPUT
XLR 3-pin, male (5)
CH1, CH2, CH3, CH4 and CUE
+4 dBm, (with 600 Ω load), low
impedance, balanced
(CUE: for HDCAM or Digital
Betacam playback only)
MONITOR OUTPUT L, R
XLR, 3-pin, male (2)
+4 dBm (with a 600 Ω load), low
impedance, balanced
TIME CODE OUT
XLR, 3-pin, male (1)
2.2 Vp-p, low impedance, balanced
PHONES
JM-60 stereo phone jack
–∞ to –12 dBu (with an 8 Ω load),
unbalanced
A-3
Appendix

Advertisement

Table of Contents
loading

This manual is also suitable for:

Srw-5003Srw-5002Srw-5000

Table of Contents