Sony SRW-5001 Operation Manual page 145

To clear a warning message
To cancel the display of a warning message, see "Clearing
warning messages" on page A-9.
Item number Display
01 NO EXTERNAL REFERENCE
02 LOST LOCK
03 NO EXTERNAL SD REFERENCE ON FC
04 HD & SD REF ASYNCHRONOUS
08 NO SDI INPUT
10 VITC NOT READ
11 AUDIO PLL UNLOCKED
14 NO PB RF SIGNAL
15 INCONSISTENT EMPHASIS
16 INCONSISTENT FORMAT OF META DATA The meta data being input and the meta data recorded on the tape
17 PB FREQUENCY IS UNSUITABLE The cassette is ejected automatically in line with the setting of the
19 NO A1/A2 INPUT
1A NO A3/A4 INPUT
1B NO A5/A6 INPUT
1C NO A7/A8 INPUT
1D NO A9/A10 INPUT
1E NO A11/A12 INPUT
21 REC INHIBIT MODE
22 CASSETTE REC INHIBIT
2D INVALID SDI DATA
34 NO CASSETTE COMPARTMENT MODE
M A I N T E N A N C E I N F O M A T I O N D I S P L A Y
P R E S E T
M O D E
2 4 F D F
R D T I M E
S E T
O P E R A T I O N 5 2 9 H O U R S
D R U M R U N N I N G 3 4 H O U R S
T A P E T R A V E L 2 0 H O U R S
T H R E A D I N G 7 8 0 T I M E S
W A R N I N G - 0 8
N O S D I I N P U T
T o t a l 8 m e s s a g e
P D T C
D F / N D F
D F
Warning message
Meaning
There is no reference signal on the selected REF INPUT connector.
The VTR is using an internal reference signal.
Capstan servo lock was lost during playback, recording, or editing.
When the VTR SETUP menu item A05 "PD EXT SD REF LOCK
MODE" is set to "lock1" or "lock2," no external SD reference signal is
input.
When the VTR SETUP menu item A05 "PD EXT SD REF LOCK
MODE" in is set to "lock1" or "lock2", HD reference signal and
external SD reference signal are not synchronized.
An SDI input signal cannot be detected.
VITC cannot be correctly read from the tape.
Audio lock generator PLL not locked to the video reference signal.
Playback heads cannot correctly read digital data from the tape.
Emphasis information on the tape is inconsistent with the system
emphasis status.
have different formats.
VTR SETUP menu item 018 "AUTO EJECT LEVEL" because the
system frequency of the VTR and the frequency of the signal
recorded on the tape do not match.
No carrier detected on digital audio input on channels 1 and 2
No carrier detected on digital audio input on channels 3 and 4
No carrier detected on digital audio input on channels 5 and 6.
No carrier detected on digital audio input on channels 7 and 8.
No carrier detected on digital audio input on channels 9 and 10.
No carrier detected on digital audio input on channels 11 and 12.
The menu settings are to a mode inhibiting recording, or the tape
format does not allow recording.
The cassette is set to inhibit recording.
SDI input signal data is invalid.
The cassette compartment does not operate because the VTR is in
"no cassette compartment" mode.
[ 2 6 H ]
[ 1 6 H ]
[ 4 4 9 H ]
S S
S T I L L
E X I T
! C U E
Warning mark
(Continued)
A-7
Appendix