Audio Menu; Selecting The Audio Input Signal (Audio In); Digital Audio Output Signal Source Track Selection (Digout Exchng) - Sony SRW-5001 Operation Manual

4-6 AUDIO Menu

In the AUDIO menu, make audio signal adjustments.
AUDIO menu screen shows the VTR operating mode,
current position time code, time code type, and so on.
Button Indication
[F1]
AUDIO IN
[F3]
DIGIOUT EXCHANGE
[F4]
ANAOUT EXCHANGE
4-6-1 Selecting the Audio Input
Signal (AUDIO IN)
To select the audio input signal for channels 1 to 12,
use the following procedure.
1
Press the [F1] (AUDIO IN) button.
The AUDIO INPUT menu appears, together with
an audio input selection window.
2
Select the audio input signal for each channel.
SDI: audio signal input from the HD SDI INPUT
A/B connector
AES/EBU: audio signal input from the DIGITAL
I/O (AES/EBU) INPUT connector
3
Press the [F10] (EXIT) button.
This returns to the AUDIO menu screen.
T A P E L O C K
A U D I O
I N
- L T C I N T R P D F
00 01
T C R
A I N - - : - - : - - : - -
D I G I O U T
I N - - : - - : - - : - -
E X C H A N G E
-
A N A O U T
E X C H A N G E
-
Function
Accesses the AUDIO INPUT menu
Digital audio output signal source track selection
Analog audio output signal source track selection TR1 to TR12
To access the AUDIO menu screen
Press the AUDIO key.
F 2
56 27
M S F
A O U T - - : - - : - - : - -
O U T - - : - - : - - : - -
Settings
SDI, AES/EBU
TR1 to TR12
Making settings for individual channels with
the F buttons
By pressing any of the [F1] (A-IN CH1) to [F4] (A-IN
CH4) buttons in the AUDIO INPUT screen, and in the
ALT+AUDIO screen obtained by pressing the ALT
button, the [F1] (A-IN CH5) to [F8] (A-IN CH12)
buttons, you can select the type of input signal for each
channel.
Making input signal selections for individual
channels with the numeric buttons
1
Press the cursor T or t button, to align the
cursor with the channel for which you want to
make the selection.
2
Press the cursor R or r button, to select the signal.
To return to the default settings
Press the center cursor button. The cursor item returns
to the default.
To select the same input signal
simultaneously on all twelve channels
Press the [F7] (A-IN ALL) button to change the input
signal simultaneously on all twelve channels.
You can also make this setting using the VTR SETUP
menu item 830 "AUDIO INPUT SELECT".
4-61
Chapter 4 Menu Settings