Activating The Dsp Modes - JVC RX-DP15BC Instructions Manual

Audio/video control receiver
Hide thumbs Also See for RX-DP15BC:
Table of Contents

Advertisement

Available languages

Available languages

All Channel Stereo mode
This mode can reproduce a larger stereo sound field using all the
connected (and activated) speakers. This mode cannot be used
without activating the surround speakers.
• If headphones are connected or if the front speakers are
deactivated, "ALL CH STEREO" cannot be selected.
• The settings on the EFFECT ADJUST submenu are not valid for
"ALL CH STEREO."
Stereo Film and Monaural Film modes
In order to reproduce a more acoustic sound field in your listening
room while viewing stereo sound or monaural sound video software
(analog and 2-channel digital signals), you can use these modes.
The surround effect will be added, and the sound localization of
actor's words will be improved. This mode cannot be used when
the source is "DVD MULTI" or "EXT 7.1CH" and when multi-
channel digital signals are coming in.
STEREO FILM : To play back stereo video software
MONO FILM
: To play back monaural video software
When "STEREO FILM" or "MONO FILM" is used, sounds come
out of all the connected (and activated) speakers.
• If incoming signals changes from 2-channel digital signal to
another digital signal type, "STEREO FILM" or "MONO FILM"
is canceled and an appropriate Surround mode is activated.

Activating the DSP Modes

Perform the basic settings and adjustments using the Setup and
Adjustment Menus first (see pages 35 to 50).
Activating one of the DSP modes for a source automatically
recalls the memorized settings and adjustments.
IMPORTANT:
Check to see if the following before or while using the buttons and
controls.
For the Zone 1 operations:
The ZONE 1 ON/OFF lamp on the unit is lit.
• When using the unit:
– "ZONE 2" is not shown in the main display.
– Press DOOR DOWN to use the buttons inside the
front door.
To close the front door, press DOOR UP.
• When using the remote control:
– Set the ZONE 1/ZONE 2 (LEARN/TRANSMIT) selector to "ZONE 1."
– Check the indication shown on the remote's display when you
press a button—this indicates the remote control operation mode
together with multi-room operation mode (either ZONE 1 or
ZONE 2) for a while.
LEARN
TRANSMIT
ZONE 1
ZONE 2
Ex. When you press DSP with
ZONE 1/ZONE 2 (LEARN/TRANSMIT) selector
set to "ZONE 1."
59
1. Select and play any sound source.
2. Press DSP repeatedly until the DSP mode you
Notes:
• When the surround speakers are deactivated, the 3D-PHONIC
• If the Surround/THX mode is in use, it will be canceled when you
To adjust the DSP effects
Using the 10 keys on the remote control, you can adjust the level of the
overall effect and the liveness (except for "ALL CH STEREO").
• Once you adjust the levels using the following procedure, the
adjustments you have done on the Adjustment Menu will be also
changed. (It is recommended to adjust the DSP effects using the
Adjustment Menu since you can adjust other elements as well.)
DOOR
1. Press SOUND.
DOWN
2. Press EFFECT repeatedly to adjust the level of
3. Press LIVENESS repeatedly to adjust the
LEARN
TRANSMIT
To cancel the DSP modes
STANDBY
ON
ZONE 1
ZONE 2
ZONE 1
ZONE 2
TV/CATV/DBS
VCR 1
Press SURR/DSP OFF.
ON/OFF
ON/OFF
STANDBY/ON
STANDBY/ON
"SURROUND OFF" appears on the display.
ZONE 1
• When a pair of headphones is connected or when the front
speakers are deactivated, "HEADPHONE" will appear.
want appears on the display.
• Each time you press the button, the DSP modes change as
follows:
DSP
On the unit
(inside the front door)
DGTL AUTO
L
C
R
SUBWFR
LFE
DIGITAL
DSP
LS
RS
=
=
LARGE HALL 1
LARGE HALL 2
=
=
OPERA HOUSE
CHURCH
=
=
DANCE CLUB
PAVILION
=
=
LARGE THEATER
SMALL THEATER
=
=
STEREO FILM*
MONO FILM*
= (Back to the beginning)
*
When multi-channel signals come in, you cannot select
"STEREO FILM" and "MONO FILM."
processing is applied to the DSP modes except "ALL CH STEREO"
(the 3D-PHONIC indicator also lights up).
turn on the DSP mode.
The 10 keys are activated for sound adjustments.
the overall effect (1 to 5).
liveness (1 to 5).
SURR/DSP
OFF
On the unit
(inside the front door)
DSP
From the remote control
SPEAKERS
1
PARAMETRIC EQ
MIDNIGHT
MODE
VOLUME
dB
=
RECITAL HALL
=
LIVE CLUB
=
ALL CH STEREO
SOUND
EFFECT
3
LIVENESS
6
SURR/DSP
OFF
From the remote control

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rx-dp15b

Table of Contents