Text Compu Link Remote Control System - JVC RX-DP15BC Instructions Manual

TEXT COMPU LINK Remote Control System

The TEXT COMPU LINK remote control system has been developed to deal with the disc information recorded in the
CD Text * and MDs. Using this information in the discs, you can operate the CD player or MD recorder with the TEXT
COMPU LINK remote control system through the receiver.
CONNECTIONS
To use this remote control system, you need to connect the CD
player and/or MD recorder you want to operate, following the
procedures below.
1. If you have already plugged your CD player, MD
recorder, and this receiver into the AC outlets,
unplug their AC power cords first.
2. Connect your CD player, MD recorder, and this
receiver as follows through the COMPU LINK
jacks and TEXT COMPU LINK jacks.
1) COMPU LINK jacks: Use cables with monaural mini-
plugs (not supplied with this receiver).
CD player
MD recorder
2) TEXT COMPU LINK jacks: Use cables with stereo mini-
plugs (not supplied with this receiver).
CD player
MD recorder
3. Connect your CD player, MD recorder, and this
receiver using the cables with RCA pin plugs (see
page 11).
4. Plug the AC power cords of these components
above into the AC outlets.
5. When turning on these components for the first
time, turn on the connected components first,
then turn on this receiver.
63
This remote control system allows you to use the functions listed
below.
Displaying the Disc Information on the TV screen
Disc information such as its performer and disc title (and track titles
only when a CD Text is selected) is shown on the TV screen.
Disc Search: Only for CD Player
This remote control system allows you to search for discs by the
performer, disc title, and music genre.
With this disc search, you can easily find the disc you want to play.
Disc Title Input
If your CD player or MD recorder has the disc memory function,
you can input the following information about the normal audio CDs
or MDs on the TV screen.
RX-DP15B
• For CDs: Performer, disc title, and music genre
• For MDs: Disc title and song titles
* What is a CD Text?
In a CD Text, some information about the disc (its disc title, performer,
composer, arranger, etc.) is recorded.
COMPU AV TEXT CTRL
IR
LINK-4 COMPU OUT
COMPU
OUT
(SYNCHRO) LINK- LINK +12V Notes:
IR 10mA MAX
• If your audio component has two COMPU LINK jacks, you can use
IN
• If your audio component has two TEXT COMPU LINK jacks, you
RX-DP15B
• "TEXT COMPULINK SOURCE NOT CONNECTED" appears on the
• Refer also to the manuals supplied with your CD player or MD
COMPU AV TEXT CTRL
IR
LINK-4 COMPU COMPU OUT
OUT
(SYNCHRO) LINK- LINK +12V
IR 10mA MAX
IMPORTANT:
IN
If you turn on the receiver before turning on the other components
after connecting the components, the TEXT COMPU LINK remote
control system does not work correctly.
If this happens:
1. Turn off all the components including this receiver.
2. Turn on the connected components.
3. Turn on this receiver.
FUNCTIONS
either one. If it has only one COMPU LINK jack, connect it so that it
is the last item in the series of components. (For example, the CD
player in the diagram on the left column.)
can use either one. If it has only one TEXT COMPU LINK jack,
connect it so that it is the last item in the series of components. (For
example, the CD player in the diagram on the left column.)
display in the following cases:
– When the connections explained on the left are not correctly
done.
– When you try to use the TEXT COMPU LINK function a few
seconds after you turn on the connected equipment. This is not a
malfunction of the units.
recorder.