Connecting Audio/Video Components; Analog Connections - JVC RX-DP15BC Instructions Manual

Connecting Audio/Video Components

When connecting individual components, refer also to the manuals
supplied with them.

Analog Connections

Audio component connections
Use the cables with RCA pin plugs (not supplied).
• Connect the white plug to the audio left jack, and the red plug to
the audio right jack.
CAUTION:
If you connect a sound-enhancing device such as a graphic equalizer
between the source components and this receiver, the sound output
through this receiver may be distorted.
Rear view
Turntable
If an earth cable is
provided for your
turntable, connect
the cable to the
screw marked (H)
on the rear panel.
To audio output
Turntable
Note:
This connection is for the turntable with an MM (moving-magnet) type
cartridge.
Any turntables incorporating a small-output cartridge such as an MC
(moving-coil) type must be connected to this receiver through a
commercial head amplifier or step-up transformer. Direct connection
may result in insufficient volume.
11
AUDIO
RIGHT LEFT
R
PHONO
IN
L
CD
IN
OUT
(REC)
TAPE
MD
IN
(PLAY)
OUT
(REC)
CDR
CD player
CD player
To audio output
Cassette deck or MD recorder
Cassette deck
To audio input
IN
R
OUT
(REC)
L
IN
(PLAY)
OUT
(REC)
MD recorder
To audio input
Note:
You can connect either a cassette deck or an MD recorder to the
TAPE/MD jacks. When connecting an MD recorder to the TAPE/MD
jacks, change the source name to "MD," which will be shown on the
display when selected as the source. See "Changing the Source
Name" on page 27 for details.
CD recorder
CD recorder
To audio input
OUT
(REC)
IN
(PLAY)
R
OUT
(REC)
L
IN
(PLAY)
FRONT
If your audio components have a COMPU LINK or TEXT
COMPU LINK jack
• See page 61 for detailed information about the connection and
the COMPU LINK remote control system.
• See page 63 for detailed information about the connection and
the TEXT COMPU LINK remote control system.
AUDIO
RIGHT LEFT
PHONO
IN
R
CD
IN
L
OUT
(REC)
TAPE
MD
IN
(PLAY)
To audio output
CD
TAPE
MD
L
R
CDR
To audio output
To audio output
TAPE
MD
CDR
L
R