Menu Operating Procedure - JVC RX-DP15BC Instructions Manual

Menu Operating Procedure

Ex.When adjusting the DSP effects
Operations
1. Press ADJUST MENU.
• Make sure one of the DSP modes except "ALL CH
STEREO" is selected.
2. Press fi or % (DOWN or UP) repeatedly
to select the desired submenu.
• In this example, select "EFFECT ADJUST"
submenu.
3. Press SET.
4. Set a desired item on the submenu.
1 Press fi or % (DOWN or UP)
repeatedly to select an item.
2 Press # or @ (RIGHT or LEFT) to set
the item.
• In this example, set "ROOM SIZE" to "5."
5. Set other items on the same submenu if
necessary.
1 Press fi or % (DOWN or UP)
repeatedly to select another item on
the same submenu.
2 Press # or @ (RIGHT or LEFT) to set
the item.
• In this example, set "LIVENESS" to "5."
To return to the previous screens
Press EXIT.
Each time you press the button, the on-screen display menu returns
to the one previously displayed. (On the main unit's display, the
indications also change accordingly.)
47
On the TV screen
ADJUST MENU
PEQ FRONT
CENTER
SURROUND
SURR BACK
MIDNIGHT MODE
EFFECT ADJUST
:ENTER
:EXIT
ADJUST MENU appears.
Move to "EFFECT ADJUST."
The selected submenu appears.
To erase the menu (to return to the regular screen)
Press ADJUST MENU.
On the main unit's display
SPEAKERS 1
VOLUME
The submenu names previously
selected appears.
Press the button until "EFFECT ADJ"
appears.
SPEAKERS 1
VOLUME
SPEAKERS
1
VOLUME
The first item on the selected submenu
appears (with the current setting shown
on the lower line of the main display).
SPEAKERS 1
VOLUME
SPEAKERS 1
VOLUME
dB
dB
dB
dB
dB