Figure 2-17 S1301 Dip Switch Bank Location On The Rtm-S (Component Side) - Sun Microsystems Netra CT 410 Manual

network traffic gets routed out through the module's RJ-45 connectors. When these
switches are set to the Off position, all network traffic is routed to the cPSB
backplane network.
FIGURE 2-17
component side of the RTM-S.
switch bank, which is located on the solder side of the RTM-S.
Caution – Never set the DIP switches on a Netra CP2500 RTM-H module. Sun does
not support changing the RTM-H DIP switches from their default settings.
FIGURE 2-17
26 Netra CT Server Hardware Upgrade Guide • February 2007
shows the location of the S1301 DIP switch bank, which is located on the
FIGURE 2-18
S1301 DIP Switch Bank Location on the RTM-S (Component Side)
shows the location of the S1302 DIP
ON
1 2 3 4 5 6 7 8
ON
1 2 3 4 5 6 7 8