94
Maintenance Recommendations
Fuel System Secondary Filter - Replace
1. Ensure that the fuel supply valve (if equipped) is in
the OFF position. Place a suitable container under
the fuel filters in order to catch any fuel that might
spill. Clean up any spilled fuel.
Illustration 66
Typical example
2. Install a suitable tube onto connection (4). Rotate
the drain valve (3) counterclockwise. Two full turns
are required.
3. Allow the fuel to drain into the container and
remove the tube.
4. Remove the filter bowl (2) from filter body (1).
Rotate the filter bowl counterclockwise in order to
remove the assembly.
Illustration 67
Typical example
5. Rotate the filter element (5) counterclockwise and
remove the filter element. Clean the filter bowl.
g03353094
Install the Element
Illustration 68
Typical example
1. Locate the thread (7) in the filter element onto the
threads (6). Spin on the new filter element and
tighten the drain valve (3) by hand.
SEBU9066
g03353105
g03353115